How often have you wanted to remove that shower insert and replace it with something nicer? Prefabricated shower inserts (AKA acrylic showers or fiberglass showers) can offer a quick remodel or build. They are generally more budget-friendly than a traditional tile shower. They come in various sizes and shapes. These are positives that you may appreciate when installing a shower. However, there are several downsides as well.
Main Content
Most Recent
Which Drywall Anchors to Use?
There is nothing worse than trying to hand something on a wall only to have it fall, or worse, tear a huge hole in the wall.
Drywall (aka sheetrock) is not made to support the weight of wall art or other necessary wall hangings. This is why using the correct drywall anchors is so important.
Paint Color of the Year
Each year, those in the know offer their predictions for color trends and what is to come. Sometimes those predictions turn out to be accurate. Sometimes… not so much. This year the colors have been predicted, and you may be surprised at where we are heading.
Under-the-Sink Storage and Organization Tips
Organizing under your sink not only makes things easier to find but also can increase storage space in kitchens and/or bathrooms. But what about that bulky drain line that is in the way? Not a problem. There are solutions for every under-the-sink design.
18 DIYs for a Designer Kitchen
Everyone wants to have a fabulous kitchen. However, most of us either don’t have the time or the budget to embark on a complete makeover – regardless of how much we would love to do one. So, what can be done to update or improve upon a kitchen that isn’t going anywhere for a while.
Microwave Location Options
One of the most difficult decisions many faces when building or designing a kitchen is deciding where to put the microwave. Which type of microwave is best? And where exactly is the best location?
DIY Pastry Board and Stove Cover
I have been wanting a large pastry board for a while now, and I finally got around to building one. It turned out GORGEOUS! I made mine out of walnut to get those deep beautiful tones. It is double-sided, which means I can flip it over and use the other side as a cutting board.
7 Ways to Flatten Wood
Every woodworker needs to have a way to flatten wood. If you think this requires you to own an expensive piece of equipment, you would be wrong. There are several options available for every budget. Each has its limits, but each can be used to create a nice flat surface to any wood plank or board.
5 Ways to Get Rid of Algae On Outdoor Surfaces
The only thing required for green algae, mold, and mildew to grow on your outdoor surfaces are moisture, shade, and a food source. The most common areas are along the northern side of homes, under trees, and in other shaded areas where drainage is slow. But we have 5 easy ways to get rid of algae, mold, and mildew on your outdoor surfaces.
Kreg Pocket Hole Jig
I want to introduce you to one of my favorite workshop tools – the Kreg pocket hole jig. If you don’t own at least one pocket hole jig, you really ought to consider getting one. There is a jig for every price point and/or frequency of use.
Most Popular Posts
Easy Way to Add Pull-Out Drawers to Bottom Cabinets
I truly believe that base cabinets were placed on earth as some cosmic joke. Well, maybe it’s not that extreme, but it certainly is aggravating to try to store things in them. You either end up with everything right at the front and a ton of wasted space in the back, or you have to take everything out anytime that you need something. Adding drawers is the solution, but so many people tell me that while they love DIYing, they just don’t have the skills or tools to do something so drastic. However, there is an easy way to add pull-out drawers to bottom cabinets, and I am going to show you exactly how!
Sloped Ceiling Closets Solutions
Designing a closet along a slanted ceiling can present a challenge. This is especially true if the builder has thrown rods and shelving up in a less than optimized location. However, with a bit of reimagining, most sloped ceiling closets can be turned into an efficient storage space.
How to Repair Sling Chairs & Chaises
I am always for upcycling or repairing things whenever I can. Sling chairs are no exception. If you have always thought this was an impossibility, check out these instructions for repairing sling chaises and/or chairs. Ripped or torn fabric is just an opportunity for a fresh new look!
Miter Saw Maintenance for Accurate Cuts
If you have a miter saw, you may have noticed that sometimes your cuts just aren’t as accurate as you would like. Typically, this isn’t obvious until you are in the process of assembling a project – usually that very last piece – and you notice that the fit isn’t as tight as you would like. This can be very frustrating, but the good news is that your problem most likely stems from your miter saw needing to be calibrated. This is something that needs to be done from time to time. Good news! I am going to show you how to perform a miter saw maintenance for accurate cuts.
Small Closets Tips and Tricks
Not long ago, I posted an article that showcased some of the most luxurious walk-in closets. However, while they were beautiful eye candy, and certainly something to dream about, I know that most of us do not have closets like those. What most people do have is are simple small closets that can sometimes present issues with storage. With that in mind, I wanted to get down to the nitty-gritty and show some small closets tips and tricks for optimizing space.
Seasonal Favorites
How To Make Wooden Stars from Scrap Wood
I thought that this week, I would show you how to make wooden stars from scrap wood. Wooden stars are the perfect accent piece for bookshelves because you can use them any time of the year. And since we are using scrap wood to make them, you can make one for every holiday or season.
DIY Christmas Lamppost and Lantern
One of the things that I love about the town that I live in all of the streetlights that are reminiscent of the last century. I am especially fond of them during the holidays when the town pulls out the seasonal decorations. This is what led me to build my own DIY Christmas lamppost complete with lantern.
DIY Rustic Halloween Lanterns
This year, I wanted to use up some of my leftover cedar fencing. With Halloween right around the corner, I thought that the cedar would be useful to create something rustic for my porch. I finally decided on making several rustic Halloween lanterns with Jack O’ lantern faces.
How to Flock a Pre-Lit Christmas Tree
Have you ever wondered how to flock a pre-lit Christmas tree? My pre-lit tree has been with me for 10 years, now. It has been stuffed and crammed and bent in all sorts of ways throughout that time, and the only wear and tear that it has displayed has been the burning out of the lights.